Peace Lily (Spathiphyllum Wallisii) Pollen
My Peace Lily has flowered and is scattering pollen everywhere. I think might even be giving me mild hayfever. Clearly the only thing to do is investigate! I happen to have this microscope slide equip…
Category: Projects
Cyanotype Attempt #1
A Cyanotype is an early photographic method which yields a characteristic Prussian Blue image. It is literally how you make a "blueprint". I've done this before on a small scale, but I'd forgotten the…
Epoxy Resin Casting Attempt #3
I wasn't going to post another of these attempts as I'd hoped to be actually doing something with it now, but as it turned out, the red owl was a failure. It never cured properly: I figured out I'd si…
Making a UV Exposure Box
I've been wanting one of these for a while for some other projects I have planned. Previously I've (ab)used an old EEPROM eraser box, but (a) I wanted something a bit larger and (b) it isn't mine and…
Making Skeletonised Leaves
I decided I wanted to try making some skeletonised leaves. So I did some Googling and decided to try this approach. We went out in the evening and gathered some leaves from the local Shrubbery. Totall…
Knitting Machine: Needle Router Working!
Check this out! https://youtu.be/zFk4xcyWZeI Needle Router v2.1 Demo I've actually had the main design on the whiteboard for a few weeks, but I wanted to play with other things for a bit: This is v2.1…
Making a Copper Leaf and Perspex Lampshade
This is a slightly older project, but since I'm waiting for the new knitting machine design to print, I thought I'd write it up. One of our standard lamps needed a new shade, so I decided to make one!…
Epoxy Resin Casting Attempt #2
I tried the resin again, this time using the vacuum chamber. I mixed it up (using a different glow in the dark colour this time), and cycled it in the vacuum chamber a couple of times. The resin mixtu…
Epoxy Resin Casting Attempt #1
I wanted to try something different so I thought I'd give Epoxy Resin casting a go. I have this cute Greek holiday trinket I inherited from my dad which I felt would make a good test piece: So, to cas…
Knitting Machine: Needle Movement Controller First Test Print
I decided it was time to try out the prototype design! I printed half of the needle movement model to save on time and materials. As a result you need to move the carriage in both directions to see th…